Arc-Fab 
CALL TODAY!SnapLock
AF 1.0" FF SnapLock Panel Profile
Panel Information
| Panel Type | Standing Seam |
| Panel Seam | SnapLock |
| Panel Width | 16'' |
| Seam Height | 1.0'' |
| Panel Material | 22 ga--24 ga min |
| Panel Surface | Smooth / Embossed Optional |
| Panel Clip | None |
| Minimum Slope | 3/12 |
| Substrate | Plywood |
Panel Testing
| Uplift Resistance | UL 90 |
| Hail Rating | Class 4 Impact UL 2218 |
| Fire Rating | UL Class A |
| Texas Department of Insurance Approval | RC-560 |
Panel Notes
| With this 24 GA, 16'' wide panel, you. may opt to use heavier gauge coil and narrower width panels. Fastener spacing will not change. |
| This panel uses a 20'' coil. Maximum width coil of 24''. |
| This panel uses 4-1/16'' of material to form the panel. |
| If you take the square footage of the roof and multiply that by 1.25, the total will be the amount of coil needed the manufacture the panels. |
| This panel is NOT approved by Weathertight Warranties. |
AF 1.5" FF SnapLock 450 SL Panel Profile
Panel Information
| Panel Type | Standing Seam |
| Panel Seam | SnapLock |
| Panel Width | 16'' |
| Seam Height | 1.0'' |
| Panel Material | 22 ga--24 ga min |
| Panel Surface | Smooth / Embossed Optional |
| Panel Clip | Required Per Engineering |
| Minimum Slope | 3/12 |
| Substrate | Plywood |
Panel Testing
| Uplift Resistance | UL 90 |
| Hail Rating | Class 4 Impact UL 2218 |
| Fire Rating | UL Class A |
| Texas Department of Insurance Approval | RC-564, RC-561 |
Panel Notes
| With this 24 GA, 16'' wide panel engineering, you may opt to use heavier gauge coil and narrower width panels. Clip spacing will not change. |
| This panel uses a 20'' coil. |
| This panel uses 4-1/8'' of material to form the panel. |
| If you take the square footage of the roof and multiply that by 1.25, the total will be the amount of coil needed the manufacture the panels. |
| This panel is NOT approved by Weathertight Warranties. |
AF 1.5" FF SnapLock 550 Panel Profile
Panel Information
| Panel Type | Standing Seam |
| Panel Seam | SnapLock |
| Panel Width | 19'' (Steel)/ 15'' (Aluminum) |
| Seam Height | 1.5'' |
| Panel Material | 22 ga--24 ga min, .032 |
| Panel Surface | Smooth / Embossed Optional |
| Panel Clip | Required Per Engineering |
| Minimum Slope | 2/12 |
| Substrate | Plywood (Steel), Plywood, B-Deck, B-Deck w/ISO (Aluminum) |
Panel Testing
| Uplift Resistance | UL 580, UL 1897, UL 90 |
| Air Infiltration | ASTM E 1680 |
| Water Penetration | ASTM E 1646 |
| Hail Rating | Class 4 Impact UL 2218 |
| Fire Rating | UL Class A |
| Texas Department of Insurance Approval | RC-560** |
| FBC Non-HVHZ Approval
** Available in steel only. |
FL18316** |
Panel Notes
| With this panel engineering, you may opt to use heavier gauge coil and narrower width panels. Clip spacing will not change. |
| This panel uses a 24'' coil (Steel) / 20'' coil (Aluminum). Maximum width coil of 24''. |
| This panel uses 5-1/8'' of material to form the panel. |
| If you take the square footage of the roof and multiply that by 1.27, the total will be the amount of coil needed the manufacture the panels. |
| This panel is NOT approved by Weathertight Warranties. |
AF 1.75" FF SnapLock Panel Profile
Panel Information
| Panel Type | Standing Seam |
| Panel Seam | SnapLock |
| Panel Width | 18'' (Steel) / 16'' (Aluminum) |
| Seam Height | 1.75'' |
| Panel Material | 22 ga--24 ga min, .040 |
| Panel Surface | Smooth / Embossed Optional |
| Panel Clip | Required Per Engineering |
| Minimum Slope | 2/12 |
| Substrate | Plywood, B-Deck w/ISO |
Panel Testing
| Uplift Resistance | UL 580, UL 1897, UL 90 |
| Air Infiltration | ASTM E 1680 |
| Water Penetration | ASTM E 1646 |
| Hail Rating | Class 4 Impact UL 2218 |
| Fire Rating | UL Class A |
| Texas Department of Insurance Approval | RC-560**, RC-388**, RC-389** |
| FBC Non-HVHZ Approval
** Available in steel only. |
FL18316** |
Panel Notes
| With this panel engineering, you may opt to use heavier gauge coil and narrower width panels. Clip spacing will not change. |
| This panel uses a 22'' coil (Steel) / 22'' coil (Aluminum). |
| This panel uses 6-1/8'' of material to form the panel. |
| If you take the square footage of the roof and multiply that by 1.34, the total will be the amount of the coil needed the manufacture the panels. |
| This panel is NOT approved by Weathertight Warranties. |
Available Colors
Environmentally Smart Colors -- Designed Energy Efficient
Terra Cotta
Aged Copper
Solar White ♣
Sandstone ♣
Surrey Beige
Colonial Red ♣
Patina Green
Regal White ♣
Ash Gray ♣
Sierra Tan ♣
Regal Red ♠
Hemlock Green ♠
Stone White
Dove Gray
Medium Bronze ♣
Burgundy ♠
Hartford Green ♣ ♠
Slate Blue
Slate Gray ♣
Mansard Brown ♣
Matte Black ♣
Evergreen ♣
Regal Blue ♣ ♠
Charcoal Gray ♣
Dark Bronze ♣
Metallic Colors
Silver ♣
Copper ♣
Champagne ♣
Pre-Weathered
Galvalume® ♣
Non-Painted
Acrylic Coated
Galvalume®
Weathered Colors
Galv-Ten™ ♦
Copper-Ten™ Raw ♦
Cor-Ten AZP® ♦
Vintage®
♣ -- Available at a slight price premium. ♠ -- Available in 26ga SMP ♦ -- Also available in Robust.
Colors shown are matched as accurately as possible, but may vary slightly from finished product. These rich and vibrant colors are produced with either Kynar 500 or Hylar 5000 resins, which provide superior color retention and allow Sheffield Metals to offer non-prorated coating warranties for most applications. Coating warranty varies for Regal Red, Matte Black, Copper, Champagn, Silver, and Pre-Weathered Gavalume. Steelscape's Vintage carries a 20 year Finish Warranty. Please contact your representative for more information.
Galvalume is a registered trademark of BIEC International, Inc. | Hylar 5000 is a registered trademark of Solvay Solexis, Inc. | Kynar 500 is a registered trademark belonging to Arkema Inc. | Cor-Ten AZP is a registered trademark and the USS in Circle, Weathered Metal Series, Galv-Ten, and Copper-Ten are trademarks of United States Steel Corporation. All trademarks are used under the license of the United States Steel Corporation.